Post by Admin on Oct 14, 2021 7:46:52 GMT -7
Here is my version of Norm Abrams design so I could roll my work table where needed, then make it solid.
Lift up and the wheels drop down and lock in place, pull the strings and the wedges pull out and the wheels fold away.
Well lately I needed more drawer storage space for project odds and ends, so . . .
I found some Hefty containers at Walmart - W = 8 1/4", L = 12", D = 6.6".
I made some 1/4" wide rails to fit under the table top 3/4" deep, but that turned out to be too shallow. 7/8" works much better.
Lift up and the wheels drop down and lock in place, pull the strings and the wedges pull out and the wheels fold away.
Well lately I needed more drawer storage space for project odds and ends, so . . .
I found some Hefty containers at Walmart - W = 8 1/4", L = 12", D = 6.6".
I made some 1/4" wide rails to fit under the table top 3/4" deep, but that turned out to be too shallow. 7/8" works much better.